DeWalt DCK853P4-QW



Key specs

Electric drill type
Hammer drill, Combi hammer, Combi set, Impact drill, Impact screwdriver
Power supply type
Battery
Type DIYer
Professional
Electric drill to use for
Screws, Drill in wood, Drill in metal, Drill in plaster and soft stone, Drill in tiles and brick
Battery/battery voltage
18 V

Pros and cons

According to our drill expert
  • Pros:
    This very extensive set is equipped with no less than 8 tools.
  • Pros:
    Thanks to the battery capacity of 5.0 Ah, you can work for longer periods of time with 1 full battery.
  • Pros:
    You can also use the 4 included DeWalt XR 18 batteries with other electric tools of the same brand and battery platform.
  • Con:
    Accessories aren't included.
Product Expert electric drills

No matter what reason you might have to buy the most frequently used types of tools in 1 go, you won't regret the DeWalt DCK853P4-QW combi set. The set consists of 8 powerful and durable machines, from circular saw to multitool. In addition, the 4 (!) included 18-volt 5.0Ah Li-Ion batteries can be used with all tools, so you'll never be without power again. You can put the set in the useful case with trolley, so moving your tools is no problem.

Cordless impact drill

The DCD996 is a cordless impact drill that lets you drill holes of 55 millimeters in wood and 16 millimeters in stone. The 11 coupling positions and the maximum torque of 95Nm also enable you to tackle demanding screwing jobs. In addition, the impact drill has LED lighting, a brushless motor, and a keyless drill chuck.

Impact screwdriver

The DCF887 has a maximum torque of 205 Nm and 3 speeds. As such, both fine and coarse screwing work can be performed. As it's equipped with 3 LED lights, you'll always have a good view of your work.

Combi hammer

Construction work often requires demolition. That's what you do with the DCH273. This SDS-plus Combi hammer doesn't just drill holes in concrete, it's also good for light grinding in tiles or plaster. The LED light with a delay mechanism always offers a perfect view of your work.

Angle grinder

With the DCG405, you can safely and carefully grind tiles, pipes, and tubes. The 125-millimeter angle grinder is equipped with an electronic engine brake, so the drive stops turning when you turn off the machine. The anti-kickback system, which prevents kickback when the drive is stuck, also contributes to your safety.

Multi-tool

For more detailed sanding, sawing, or scraping jobs, use the DCS355. This oscillating multi-tool makes 20,000 revolutions per minute. Thanks to the variable speed and integrated LED lighting, you'll work in a controlled and safe manner.

Reciprocating saw

In places that are hard to reach, sawing with the DCS367 reciprocating saw makes things easy. It's compact, equipped with LED lighting, and because the saw blade can be placed in 4 positions, you can also cut right above the ground or along the wall.

Circular saw

A circular saw is indispensable during large-scale projects. That's why the DCS570 can't be missed in this set. The maximum saw depth is 65 millimeters. The extra handle means you can cut with 2 hands, even if you're doing chamfer work. You can adjust this continuously from 0° to 57°.

Work light

Good visibility while working is crucial for a good job result. The DCL050 is a battery-powered work light that you can set to 2 light levels, and that stays on for up to 12.5 hours. The head has 9 positions so that even in impossible corners, you won't have to work without light. The lamp can be used freestanding, but you can also hold it in your hand or hang it up.


Included by default

  • Manual
  • 18-volt cordless impact drill DCD996
  • 18-volt impact screwdriver DCF887
  • 18-volt combi hammer DCH273
  • 18-volt angle grinder DCG405
  • 18-volt multi-tool DCS355
  • 18-volt reciprocating saw DCS367
  • 18-volt circular saw DCS570
  • LED lamp DCL050
  • 18-volt 5.0Ah Li-Ion battery (4x)
  • Duo charger
  • Tough System case DS150
  • Tough System case DS300
  • Tough System case DS400
  • Tough System Trolley

Recommended combination

DeWalt DCK853P4-QW
DeWalt DCK853P4-QW
Included accessories
Bit
Bit
Select alternative
Decoupeerzaag
Decoupeerzaag
Drill
Drill
Select alternative

With this recommended combination, you can be sure that everything goes well together.

2.317,98 2.307,98
Delivered tomorrow


Insure your drill

You can select the Backup Plan below in your shopping cart. It will protect your brand new drill against damage.

DeWalt DCK853P4-QW

DeWalt extra warranty

DeWalt extra warranty
Register your DeWalt machine within 4 weeks after buying it to receive 2 years of extra warranty on top of DeWalt's standard warranty. This gives you a total of 3 years of warranty on your DeWalt product. View the promotional Terms and Conditions (PDF) for more information.

One battery for all your tools

One battery for all your tools
The DeWalt DCK853P4-QW works on a battery that can be exchanged with other tools of the same brand and with the same battery platform. Handy! So you immediately have an extra battery on hand, or you may already have a suitable battery in your possession. Would you like to know more about the benefits of working with the same battery platform? Then read on to the advisory page .

Specifications

Product

Product number
812095
Manufacturer code
DCK853P4-QW
Brand
DeWalt
Warranty
2 years
Warranty type
Carry-in warranty

Physical properties

Weight
1,6 kg
Built-in lighting
Yes
Included by default
Storage case
Charging dock included
Yes
Storage case type
ToughSystem

Power supply

Power source
Yes
Power supply type
Battery
Required battery/battery voltage (device)
18 V
Required battery technology (device)
Lithium-ion
Type of battery
Specific battery
Battery platform
DeWalt XR
Battery included
Yes
Number of batteries included
4
Battery/battery voltage
18 V
Battery/battery capacity
5 Ah

Drilling properties

Electric drill type
Hammer drill, Combi hammer, Combi set, Impact drill, Impact screwdriver
Drill head type
Quick release
Drill head span capacity
1,5 - 13 mm
Impact function
Yes
Number of revolutions
0 - 38250 rpm
Hammer function
No
Number of mechanical speed settings
3
High nominal speed
0 - 2000 rpm
Low nominal speed
0 - 450 rpm
Brushless motor
Yes

Gebruiksgemak

Integrated dust extraction
No
Electric drill to use for
Screws, Drill in wood, Drill in metal, Drill in plaster and soft stone, Drill in tiles and brick
Drill capacity diameter in stone
16 mm
Number of torque settings
11
Drill capacity diameter in soft stone
16 mm
Drill capacity diameter in wood
55 mm
Drill capacity diameter in metal
15 mm
Maximum torque of hard screw connection
95 Nm
Type DIYer
Professional