Ferm CDM1127

151,99
Limited supply, order now

Product information


Pros and cons

According to our impact wrench expert
  • Pros:
    With a force of 380 Nm you can loosen or tighten each bolt and nut.
  • Pros:
    Thanks to the power supply via battery you always work completely cordless.
  • Pros:
    The handy LED lighting shines on the work surface.
  • Con:
    If the battery is empty, it takes at least 3 hours before it is fully charged again.
Product Expert impact wrenches

You can easily take the Ferm CDM1127 to the garage, workshop or other places where nuts and bolts have to be tightened properly. The impact wrench works on an 18 volt battery, so you never have to worry about an awkward cord. The maximum torque of 380 Nm makes the CDM1127 extremely powerful and suitable for changing (car) tires or dismantling furniture. Depending on the job you set the speed yourself, up to a maximum of 2300 revolutions per minute. Thanks to the built-in lighting, you also have good visibility in poorly lit areas. The impact wrench is supplied complete in a suitcase and with a 2-piece socket set.


Included by default

  • Manual
  • 18 volt 4.0 Ah Li-Ion battery
  • Battery charger
  • 2-piece socket set
  • Storage case

Related products



Specifications

Product

Created with Sketch. Product number
770028
Created with Sketch. Manufacturer code
CDM1127
Created with Sketch. Brand
Ferm
Created with Sketch. Warranty
3 years
Created with Sketch. Warranty type
Carry-in warranty

Physical properties

Created with Sketch. Weight
2,45 kg
Created with Sketch. Brushless motor
Yes
Created with Sketch. Storage case type
Standard case
Created with Sketch. Included by default
Storage case
Created with Sketch. Battery charging time
3 h
Created with Sketch. Battery/battery capacity
4 Ah
Created with Sketch. Charging dock included
Yes
Created with Sketch. Battery technology
Lithium-ion
Created with Sketch. Battery/battery voltage
18 V

Properties

Created with Sketch. Number of mechanical speed settings
1
Created with Sketch. High nominal speed
0 - 2300 rpm
Created with Sketch. Number of torque settings
1
Created with Sketch. Maximum torque of hard screw connection
380 Nm
Created with Sketch. Drill head type
1/2 "square
Created with Sketch. Type DIYer
Occasional handyman
Created with Sketch. Power supply type
Battery
Created with Sketch. Battery/battery capacity
4 Ah
Created with Sketch. Battery technology
Lithium-ion
Created with Sketch. Battery charging time
3 h
Created with Sketch. Charging dock included
Yes
Created with Sketch. Number of batteries included
1
Created with Sketch. Battery/battery voltage
18 V
Created with Sketch. Required battery/battery voltage (device)
18 V
Created with Sketch. Required battery technology (device)
Lithium-ion
Created with Sketch. Replaceable battery
Yes
Created with Sketch. Weight
2,45 kg
Created with Sketch. Brushless motor
Yes
Created with Sketch. Storage case type
Standard case
Created with Sketch. Included by default
Storage case