Weidmuller Volt Check 3.1
Never available again
View alternatives in the sidebar
View alternatives in the sidebar
Measurement category | CAT III 600 V, CAT IV 300 V | |
|---|---|---|
Measuring range Volts direct current (DC) | 690 V | |
Measuring range Volts alternating current (AC) | 690 V |
The Weidmuller Volt Check 3.1 is a 2-pole voltage tester. This allows you to check whether certain current points or circuits are de-energized. The voltage tester is in the CAT III 600 V and CAT IV 300 V measurement categories. It has a high peak voltage resistance and is suitable for various application areas. You therefore use it for both indoor equipment and the connections in buildings and at the source of low-voltage installations. You can read the height of the voltage on the LED lamp. In addition, you also measure temperatures from -15 to 50 degrees Celsius. With the Volt Check 3.1 you always keep your voltage under control.
5 stars
0
4 stars
0
3 stars
0
2 stars
0
1 star
0
Product number | 803744 | |
|---|---|---|
Manufacturer code | 9918950000 | |
Brand | Weidmuller | |
Processing of your defect | Via Coolblue | |
Old product returned for free |
Width | 2,5 cm | |
|---|---|---|
Depth | 1,9 cm | |
Height | 11,9 cm | |
Weight | 115 g | |
IP certification | IP64 | |
Data display | Analog |
Power supply type | Power grid | |
|---|---|---|
Connection voltage | 230 V | |
Cable length | 0 m | |
Operating radius | 0 m | |
Power | 0 W |
Measurement category | CAT III 600 V, CAT IV 300 V | |
|---|---|---|
AC (AC) measurement | ||
Direct current (DC) measurement | ||
Resistance (Ohm) measurement | ||
Frequency (Hz) measurement | ||
Battery test | ||
Diode test | ||
dB test | ||
Continuity test | ||
Data hold function | ||
Transistor measurement | ||
Temperature measurement | ||
Measuring range ampere alternating current (AC) | 0 A | |
Measurement deviation volts alternating current (AC) | 1 % | |
Measuring range Volts alternating current (AC) | 690 V | |
Measurement deviation ampere direct current (DC) | 0 % | |
Acoustic warning signal | ||
Measuring range Volts direct current (DC) | 690 V | |
Measurement deviation ampere alternating current (AC) | 0 % | |
Measuring range ampere direct current (DC) | 0 A | |
Measurement deviation volts direct current (DC) | 1 % | |
Measuring range in Celcius | -15 - 50 °C | |
Continuity test | ||
Measure electrical capacity | ||
Width | 2,5 cm | |
Depth | 1,9 cm | |
Height | 11,9 cm | |
Weight | 115 g | |
IP certification | IP64 | |
Data display | Analog | |
Power supply type | Power grid | |
Connection voltage | 230 V | |
Cable length | 0 m | |
Operating radius | 0 m | |
Power | 0 W |