How do you place the Claris Smart water filter in your JURA D6?

In this article, we'll show you how to place the JURA Claris Smart water filter in your JURA D6 step-by-step. The water filter blocks calcium, so there's no limescale buildup in the pipes of your coffee machine. Make sure that you replace the water filter once every 3 months. You'll see a notification on the display when you have to do so.

Video instructions
How often should it be replaced?
Remove the old water filter
Rinse the water filter

Get started with the water filter

Follow the instructions in the video to place the water filter the right way. This takes about 10 minutes. We'll take you through the steps:

Step 1. Remove the old water filter
Step 2. Install the new water filter
Step 3. Rinse the water filter

You need:

JURA Claris Smart water filter
Container of at least 500ml

JURA maintenance

How often should you replace the water filter?

To make sure there's no limescale buildup in your coffee machine, you have to replace the water filter about once every 3 months. The display will show a notification when it's time. That's useful, because you don't have to keep track of it yourself. You can only use the JURA Claris Smart water filter. That's the only filter that fits in the JURA D6 water tank.

JURA Claris Smart+ Water Filter

Review is 8,7 out of 10, based on 55 reviews.

Suitable for JURA machines | Makes descaling unnecessary | Replace every 3 months

15,99

Delivered tomorrow

Step 1. remove the old water filter

On the display you'll see 'filter' and 'espresso' alternate when it's time to replace the water filter.
Remove the water tank from the coffee machine.
Empty the water tank.
Open the filter holder and remove the used filter from the water tank.
Place the new water filter in the water tank.
Close the filter holder.

Step 2: rinse the water filter

Fill the water tank until the 'max' line and place the full water tank back in the machine.
Place a container of at least 500ml under the hot water outlet.
You'll see 'open dial' on the display.
Turn the dial from the 'I' to the steam function.
You'll see 'filter rinses' on the display. Water will now come out of the machine.
When you see 'close dial' on the display, turn the dial back to the 'I'.
Remove the collection tray and empty it in the sink.
The display shows 'espresso'.
You have successfully installed the water filter in your JURA D6.

Get all the maintenance products you need

JURA Maintenance Package Half a Year
- Maintain your machine for half a year.
- Extends the lifespan and prevents defects.
- More affordable to purchase than separate products.
From
131,-
JURA Maintenance Pack 1 Year
- Maintain your machine for 1 year.
- Extends the lifespan and prevents defects.
- More affordable then 2 maintenance packs of half a year.
From
257,-

Article by Charlotte

Coffee Machine Expert.