Written by Charlotte
Edited on
13 October 2025
·
14:50
How do you make your De’Longhi Maestosa EPAM 960.75.GLM ready for use?
You've bought the De’Longhi Maestosa EPAM 960.75.GLM. Now all you have to do is make the machine ready for use, so you can start enjoying your coffee. In this article, we'll explain step by step how to make the coffee machine ready for use. Watch the video or read all of the instructions below.
Get started with your De'Longhi Maestosa
In this video, we'll show you how to make the De'Longhi Maestosa ready for use. These are the steps we'll discuss:
- Step 1. Turn on the coffee machine
- Step 2. Fill the water tank and rinse the machine
- Step 3. Fill the bean hopper
You need:
- 100ml container
- Coffee beans
Step 1: connect the coffee machine
- Remove the stickers and protective film from the coffee machine.
- Plug the coffee machine into the socket and make sure the main switch at the back of the device is pressed.
- Select the desired language by pressing the right flag.
- Fill the water tank with fresh water. Use the button on the right to open the front door.
- Fill the water tank to the 'max' marking, put the tank back in place, and close the dor.
- Insert the hot water spout.
- Place a container of at least 100ml below the steam wand.
Step 2: rinse the machine
- Fill the bean hopper and press 'Next'.
- The steam wand will rinse with water in the mean time. Once it's empty, the notification 'Water circuit empty, press OK to start filling' will appear on the display. Confirm this by pressing 'OK'.
- Finally, the notification 'Machine setup underway. After it turns off turn on again' will appear on the display. The steam wand rinses with water. After, the machine will turn off automatically.
- Remove the hot water spout from the machine and click the milk reservoir into the machine.
- The machine is now ready for use.
