AnyGrip Stretchy Universal Passive Holder

Most helpful reviews

• 4.5 / 5 stars

  9,2/10

  Super versatile mobile phone holder!

  Joris Van Driessche | 9 August 2014 | Bundle contains: None | Automatically translated from Dutch

  • sticks great on dashboard
  • beautiful design
  • easy to assemble/disassemble
  • device vibrates a bit when driving
  • remove device with 2 hands

  I bought the Anygrip after receiving very good advice from Lochristi's shop. We looked at all possibilities together and this holder would be the best for what I wish to use it.
  
  I wanted a mobile phone holder, in this case for an Iphone 4S, to be able to use this GPS. But I didn't want a suction cup on my windshield..
  And if I ever have another device, that's no problem since you can pull out the clamp up to 9 cm!
  
  This holder is just perfect for that, sticks very well, never came loose during our holiday.
  
  I am very happy with it, thank you Coolblue for your excellent advice!

  Joris Van Driessche | 9 August 2014 | Bundle contains: None | Automatically translated from Dutch
• 3 / 5 stars

  5,6/10

  good but not for long

  Bas Stiekema | 19 September 2014 | Bundle contains: None | Automatically translated from Dutch

  • easy to assemble
  • handy with turning and positioning phone
  • phone clamps fine
  • is quickly 'on'

  When I bought it in December it was fine until it got warmer in the summer. If it gets above 24 degrees, it won't stay put. After half a year it doesn't work at all anymore. My wife's broke down after three months. I will not buy it again and do not recommend it.

  Bas Stiekema | 19 September 2014 | Bundle contains: None | Automatically translated from Dutch
• 5 / 5 stars

  9,6/10

  Unexpectedly solid and practical

  AddVariety | 23 May 2014 | Bundle contains: None | Automatically translated from Dutch

  • universal regardless of car/phone
  • rock solid
  • easy to fix
  • supplied 3M sticker for difficult surfaces
  • vibrates relatively slightly more than a fixed system

  For this I have used a system for a number of years that specifically connects to car X and telephone Y. However, I found it a major disadvantage that I had to purchase a new holder part with a new telephone and soon a new mounting system with a new car. .
  
  Looking for a more universal system, I came across this Anygrip passive holder. The design appealed to me, but it didn't seem to work well, until I noticed the high rating this product gets from almost every reviewer. The accompanying reactions were also so impressive that I just couldn't ignore it. And the product is not expensive either, so why not?
  
  So I contacted Coolblue to ask if they knew how high the clamp section is, as I was concerned that this might be a bit problematic with my Lumia 1020 (which has about 3cm between the buttons). It is 2.2cm high, it turned out after an extremely quick response from customer service.
  
  Used to the "next day delivery" delivery from Coolblue, I ordered and indeed the package arrived the next day in perfect order. Unpacked it turned out to be an even more compact model than I expected. But it sure felt solid. On to the 'installation' in the car.
  
  A 3M round sticker/sticker is included, according to the packaging for surfaces that the suction cup does not stick to. Think in particular of golf ball-like relief on your dashboard or a place where you have two seams. Incidentally, I read some comments in the reviews that it would not be clear what this sticker is intended for, but then those people have unfortunately looked over the packaging, since it is indeed stated on it. But hey... who reads the packaging for such a simple product? I deliberately went looking for it after reading those comments.
  
  My Toyota Prius has a strip next to the screen on the dashboard that is just a little wider than the suction cup. The surface is slightly curved, but otherwise smooth in texture, so in terms of attachment it probably falls in one of the most optimal situations. When installing, it is noticeable that the suction cup is made of a slightly sticky material, unlike the time-honoured suction cups we all know, which never stick well without some moisture or a perfectly flat surface.
  
  Once attached, it is wall-mounted. The phone fits nicely in it and in addition to my Lumia 1020, my wife's iPhone 5 also fits in it, although it seems that this is the narrowest size possible in this holder. Although that won't cause problems for almost anyone, I can't think of a smartphone that is narrower.
  
  When driving it is noticeable that there is just a little more vibration in the whole than the previous system I had. Nevertheless, it is not disturbing and still rock solid. Also with reading the screen during navigation this does not present any problems at all.
  
  Furthermore, the advantage is that I will soon be able to transfer this holder to my new car without adjustments, at the most using the 3M sticker.
  
  In short: if I'm going to be fussy, I can call the shaking as a minus, but it's not that bad and it's only relative.

  AddVariety | 23 May 2014 | Bundle contains: None | Automatically translated from Dutch
• 5 / 5 stars

  10/10

  Value for your money

  • Very solid holder
  • Easy and firm mounting
  • Rotate 360 degrees
  • No

  The Anygrip is a solid phone holder, in which I dare to attach my iPhone 5 without hesitation, not afraid that it will fall out. The holder is very easy to attach (on the dashboard) and it also stays in place very well. The possibility to rotate the holder 360 degrees is also a great functionality for quickly switching between portrait/landscape mode.
  
  Contrary to some other reviews, I find it very easy to attach my phone with one hand. It's just a matter of mastering a little skill.
  
  There are plenty of other (much) cheaper holders on the market, but the relatively high price for this holder is absolutely no problem given the perfect ease of use. Definitely recommended!

  R. Slangen | 22 August 2013 | Bundle contains: None | Automatically translated from Dutch
• 5 / 5 stars

  10/10

  recommended, simple and effective

  • decent quality
  • quick to assemble
  • device is well clamped, also with cover
  • neck can be rotated 360 degrees

  Have only had it for an hour and must say that it is easy to install, even on an uneven dashboard surface (Ford C-Max).
  
  The suction cup is made of a kind of 'sticky' plastic and adheres perfectly to the surface. My iPhone 5S in combination with the original case fits perfectly between the clamps. These clamps contain a red soft rubber layer so that there is no chance for scratches. Well thought out, right? The 'neck' can also be rotated 360 degrees by means of a ball joint.
  
  All in all it is a good quality product, plastic feels solid and strong.
  
  I would recommend this item to anyone, especially considering that you can always disassemble and store it.

  Daantje | 8 July 2014 | Bundle contains: None | Automatically translated from Dutch
• 4 / 5 stars

  8,0/10

  Anygrip Universal for iPhone 5 with Skin

  • attractive price
  • can be used for iPhone 5 with skin
  • sticks well to the dashboard
  • leaves no traces on the dashboard
  • place to insert charger
  • clamp must be pulled apart with 2 hands to install phone

  Coolblue.be offers a lot of carholders for an iPhone 5.
  
  Disadvantage: most car holders are made to nicely enclose the iPhone 5, i.e. with an iPhone with skin you would always have to remove the skin before installing it.
  
  That is why 1 week ago I asked the Coolblue team to send me a list of car holders for an iPhone 5 mét skin.
  
  I got an answer very quickly. The following products were suitable for this:
  
  1)
  Brodit passive holder Apple iPhone 5 with rugged skin
  
  2)
  Brodit passive holder Apple iPhone 5 with skin
  
  Number 1 is intended for iPhone 5 with rugged skin, so a thicker protective such as an otterbox case, number 2 is for a normal bumper.
  
  This is what I was looking for, only 1 drawback:
  
  You need to purchase a mount set or proclip for the holder, this is necessary to be able to install it in the car of your choice.
  
  You can buy a package, which contains the carholder and a mountset:
  
  Search: Brodit passive holder Apple iPhone 5 + mount set
  
  We are of course in a different price range for the same purpose, namely: hanging my mobile phone in the car in a convenient + safe way.
  
  That's why I contacted the Coolblue team again. I asked if they could recommend a universal holder for the iPhone 5 + skin (with bumper) with a recess for plugging in the charger.
  
  That's how I ended up with the 'Anygrip Universal passive holder UC'.
  
  Ordered in the afternoon, delivered the morning after by bpost.
  
  I find a sturdy holder that fits perfectly. The holder is also easy to install and sticks firmly to the dashboard.
  
  The holder can be turned in 2 directions and the suction cup leaves no traces on the dashboard.
  
  Because the holder grips the iPhone in the middle, there is room to insert a charger.
  
  Henk Kuyer said in the previous review that the clamp should be pulled apart with 2 hands, I must agree. This could indeed have been more convenient.
  
  For the rest: a very good carholder at an attractive price! Especially for an iPhone with skin.

  Dries Vinck | 14 January 2013 | Bundle contains: None | Automatically translated from Dutch
• 4 / 5 stars

  8,4/10

  Very solid holder

  • universal
  • sticks to all surfaces
  • 2 hands needed

  I've had this holder for a month now and have used it many times. My dashboard is fairly convex in shape but that is no problem at all when attaching this holder, it stays in place very well and is very manoeuvrable.

  Pieter | 24 November 2013 | Bundle contains: None | Automatically translated from Dutch
• 5 / 5 stars

  9,6/10

  Perfect Universal Holder!

  • sticks well
  • nice simple design
  • tailor-made for every mobile phone
  • worth its price!
  • manual on box

  Easy to install holder. In my car, however, it did not stick to the dashboard (too bumpy relief), but with the 3M supplied sticker. The one placed on the dashboard, the holder on it and it fits perfectly! Do not let go while driving and the advantage is that everyone can click his / her mobile in between. So change your mobile, no problem, it adapts effortlessly.
  I push the right corner with one side of the mobile phone, grab the left corner with my hand, until it is the right size, release and the phone stays perfectly in place. Practically does not vibrate while driving. An improvement point is that the packaging (which is transparent) contains the necessary explanation, there is no manual. So don't throw the box away until the holder is properly installed (which is super easy by the way). It is a beautiful and very simple design. Does not disturb and can be placed on the dashboard (no dirty circles on the windows). If you see the product in a photo, it seems less qualitative than it is in reality. In my opinion a real recommendation!

  Jet | 10 February 2015 | Bundle contains: None | Automatically translated from Dutch
• 1 / 5 stars

  2,0/10

  okay, old

  • Good grip, stable
  • Sits firmly on attachment point
  • strong spring
  • Feather breaks quickly

  Functionality fine, durability not great.
  Bought two devices, both after a few months with broken spring

  Aart Groenendijk | 15 July 2016 | Bundle contains: None | Automatically translated from Dutch
• 4 / 5 stars

  8,4/10

  great product

  • Easy to stick on.
  • Mobile is firm
  • Good for an S7 Edge
  • Sometimes hard to get phone out.

  Ideal for in the car, definitely recommended.

  Stefan Groeneveld | 12 September 2016 | Bundle contains: None | Automatically translated from Dutch