Written by Ruben
Edited on
13 October 2025
·
14:59
How do you clean the milk system of your Krups EA819E Quattro Force?
Clean the milk system of your Krups EA819E Quattro Force coffee machine after every milk preparation. On this page, we'll explain how to clean the milk system. You can remove milk rests and prevent the milk from not frothing properly. The cleaning process is divided into 3 steps. First, you prepare the machine. Then, you disassemble the parts and rinse them off.
Get started with cleaning the milk system
With the useful video instructions, you can see how to thoroughly clean the milk system of your Krups EA819E Quattro Force step by step. We'll take you through the following steps:
- Step 1: prepare the milk system
- Step 2: disassemble the milk frother
- Step 3. rinse all parts
You need:
- Durgol milk system cleaner
- Kitchen towel
How often do you clean the milk system?
We recommend you to clean the milk system on a regular basis, so you can continue to enjoy good milk foam. Clean the separate parts every day and clean the milk system thoroughly once a week. You can use the Durgol milk system cleaner for this. This cleaner effectively removes milk rests from your coffee machine. You can measure the exact amount with the dosing lid.
Step 1: prepare the machine
- Take the milk tube out of the coffee machine and out of the milk reservoir.
- Lift the stainless steel handle.
- Take the milk reservoir out of the machine.
- Set the button on the milk reservoir to 'Cappuccino'.
Step 2: disassemble the milk system
- Disassemble all the parts of the milk reservoir.
- Set the button to 'Clean'.
- Pull the button out.
- Take the silicone part out.
- Unscrew the small, black part in the lid with the black tool that's included.
- Pull the tube from the lid.
Step 3: rinse all parts
- Rinse every part with lukewarm water.
- Clean the narrow opening with the included needle.
- Dry the parts properly.
- Reassemble all parts of the milk reservoir.
- To set the button correctly again, set it to 'Clean' first.
- Push the milk tube into the opening of the milk reservoir.
- Push the stainless steel handle back down again.
- Connect the other end of the milk tube to the coffee outlet.
- Set it back to 'Cappuccino'.
- The milk system has now been cleaned successfully.
Get all the maintenance products you need
- Krups Maintenance Pack Half a Year
Maintain your machine for half a year.
Extends the lifespan and prevents defects.
More affordable to purchase than separate products.
From
68,-
- Krups Maintenance Pack 1 Year
Maintain your machine for 1 year.
Extends the lifespan and prevents defects.
More affordable then 2 maintenance packs of half a year.
From
115,-
