How do you mount the BLACK+DECKER BEBLV300SB-QS?

Written by Kelly

Edited on

30 December 2024

·

08:50

How do you mount the BLACK+DECKER BEBLV300SB-QS?

You've bought the BLACK+DECKER BEBLV300SB-QS 3000W 3IN1 and want to make your garden leaf-free as soon as possible. You have to assemble the leaf blower first. It's important to assemble it accurately to prevent future problems with the leaf blower. We'll show you how to assemble the leaf blower as easily as possible in 6 steps.

  • Assemble leaf blower in 6 steps
  • Check parts
  • Assemble blowpipe
  • Attach blowpipe
  • Detach suction pipe
  • Attach suction pipe
  • Attach collection bag

Assemble the leaf blower in 6 steps

Follow the steps below and watch the instruction video to assemble the BLACK+DECKER BEBLV300SB-QS 3000W 3IN1.

Step 1. Check parts

Step 2. Assemble blowpipe

Step 3. Attach blowpipe to base

Step 4. Detach blowpipe

Step 5. Attach suction pipe

Step 6. Attach collection bag

Assemble leaf blower

Step 1: check all parts

Organize all of the separate parts of the leaf blower and make sure nothing is missing. Compare the parts to the ones you see in the overview in the manual.

Assemble the BLACK+DECKER BEBLV300SB-QS 3000W 3IN1 

Step 2: assemble the blowpipe

  1. Grab the 2 narrow elongated blowpipes (number 7 and 8 in the manual) and slide them together.

  2. Note: you have to put a lot of pressure on it to attach them, or you'll have issues with the air flow later on.

Attach blowpipe to leaf blower

Step 3: attach the blowpipe to the base

  1. Attach the assembled blowpipe to the base of the leaf blower.

  2. Put enough pressure on it to attach the parts properly.

Switch leaf blower blowpipe

Step 4: detach the blowpipe

Want to replace the blowpipe with the suction pipe? Follow the steps below to detach the blowpipe again.

  1. Remove the silver pin of part 6 in the manual. It's attached to the side with tape.

  2. Put the pin in the hole next to the pipe attachment and the base. You can now pull the blowpipe from the base.

Attach leaf blower suction pipe

Step 5: attach the suction pipe

Did you detach the suction pipe and want to attach the blowpipe? Follow the steps below.

  1. Attach part 5 and 6 in the manual to each other.

  2. Unscrew the disc from the bottom of the base to unlock it.

  3. Push the silver pin into the hole next to the disc to open the disc.

  4. Unscrew the suction pipe from the lock by twisting it into the direction of the arrows.

  5. Attach the suction pipe to the base.

  6. Note: tighten the suction pipe until it's locked or it'll affect the suction power.

Attach leaf blower collection bag

Step 6: attach collection bag

  1. Slide the end of the collection bag hose into the bottom of the base.

  2. Push the silver pin into the hole below the hose attachment and the base to detach the hose again.

Was this page helpful?

Article by Kelly

Leaf Blower Expert.

Kelly