Written by Charlotte
Edited on
13 October 2025
·
14:31
How do you make your JURA ENA 4 ready for use?
On this page, we'll show you how to make your new JURA ENA 4 coffee machine ready for use. In this video, you'll see the exact step you need to go through before you can drink your first coffee. The job only takes 10 minutes.
Get started with your JURA ENA 4
In the video, we'll give a step-by-step explanation on how to make your machine ready for use. We wrote down every step on this page. We'll go through these steps with you:
- Step 1. Connect the machine
- Step 2. Set up the water hardness
- Step 3. Set up the water filter
- Step 4. Rinse the machine
You need:
- Water hardness test strip
- Water filter with attachment
- 1L container
- Coffee beans
Step 1: connect the coffee machine
- Take the foil from the machine.
- Take the booklet from the bean hopper.
- Put the connector in the socket.
- Press the on/off button and turn on the machine.
Step 2: adjust the water hardness
- Take the water hardness test strip.
- Fill a glass with tap water.
- Dip the test strip in the water briefly.
- Wait 1 minute for the result. The number of red squares indicates the water hardness.
- Press the button with the small coffee cup.
- Make sure there are as many coffee beans on the display as there are red squares on the test strip. Use the button with the coffee bean.
- The machine saves this automatically.
Step 3: set the water filter
- Set up the water filter right away. If all is well, the display shows symbols of the water filter and water tank.
- Take the water tank from the machine and rinse it with water.
- Fill the water tank with water up to the 'max' line.
- Take the water filter and click the attachment on the water filter.
- Place the water filter in the full water tank. Click the attachment into the water tank.
Step 4: rinse the machine
- Place the container under the coffee outlet and put the water tank back into the machine.
- The machine automatically recognizes that you placed the water filter.
- The machine rinses for a few minutes.
- If the icons don't blink anymore, you can empty the drip tray and container. Only place the drip tray back afterwards.
- Fill the bean grinder with fresh coffee beans.
- The machine is now ready for use.
How often do you clean your JURA coffee machine?
If you clean your JURA ENA 4 in time, the coffee quality stays as high as possible. In addition, you use your coffee machine hygienically. If you perform the following maintenance, you prevent blockages and defects:
- Clean brew group: once every 1.5 month
- Replace water filter: every 3 months
- Descale: every 3 months without water filter
Water filters 2x | Cleaning tablets 6x
41,99
Delivered tomorrow
