Written by Marijn
Edited on
27 January 2025
·
13:10
How do you solve error codes on a Beko dishwasher?
Your Beko dishwasher stops and shows an error code. That's inconvenient, because you're left with dirty dishes. Luckily, there's a solution. In this article, we'll tell you how to solve the error yourself, so your dishwasher will work again soon.
Solve Beko error code
In this article, we'll go over the following errors:
- Error code E01
- Error code E02
- Other errors
Error code E01
Do you see error code E01? The dishwasher doesn't drain water. Do the following:
- Check the supply and drain hose. Remove possible kinks.
- Check the filter. Is it blocked? Clean it carefully under the faucet.
- Check if the water drain is blocked and clean it if it is.
- Clean the dishwasher, so you can prevent caked-on dirt.
Error code E02
With an E02 error code, the dishwasher gets little or no water. Turn on the water supply and check the water pressure. Put a bucket underneath the water supply and fully turn it open. Within a minute, you should have about 10L water. If that's not the case, call a plumber. Check the supply and drain hose and remove any bends. Is the error code still not going away? Clean the filter.
Other errors
Do you see one of the following errors:
- E03
- E04
- E05
- E06
- E07
- E08
We recommend you to not fix the error code yourself. A component may be broken. Turn off the appliance and contact us or Beko.
Article by Marijn
Dishwasher Expert.
