Written by Rowan
Edited on
27 January 2025
·
13:10
How do you connect your Inventum stove?
Congratulations with your new Inventum gas stove. After reading this article, you'll know how to connect your Inventum stove to the gas supply. Make sure you close the gas valve before you start. Rotate the valve until it's perpendicular to the pipe. That means it's closed.
Disclaimer
Connecting to gas isn't difficult, but it must be done properly. If you're not sure how to do it, leave the connection to the professionals. Connecting to gas with the help of this article is at your own risk.
Step 1: open the bag with installation materials
Grab the plastic bag with the installation materials from the oven or package of your stove. It contains a ring, 2 nozzles, and a connector that looks like a bolt. You don't use the nozzles.
Step 2: check the connector of the stovee
There's a tube connected to your stove. There's a joint shaped like a bolt on it.
Step 3: attach the connector
Take the ring from the plastic bag and place it in the connector. Rotate the connector with the cardboard ring in it onto the tube with the connector. Tighten it until it won't move anymore.
Connect gas hose
Connecting a has hose the same as with other stoves. So grab the gas hose and connect it as explained on this page:
Article by Rowan
Gas Stove Expert.
