Written by Chiara
Edited on
6 October 2025
·
10:38
How do you solve a Wisberg washing machine error?
Do you see an error code on the display of your Wisberg washing machine? Luckily, you can easily solve most errors yourself. Check whether the drain hose or drain filter are hidden under the washing machine, for example. We'll tell you how to solve common errors yourself.
Wisberg washing machine error E10
With error E10, there's a problem with the water supply.
- Open the faucet completely and then close it.
- Place a bucket underneath the faucet and unplug the plug from the socket.
- Disconnect the water supply hose from the faucet and clean the water filter. Remove the hose from the washing machine as well, and check if something got stuck in it.
- Once you've cleaned it, reconnect the supply hose and put the plug back in.
- Turn on the faucet again and make sure that there's no kink in the hose.
Wisberg washing machine error E12 or E21
In case of error E12 or E21, there's a problem with the water drain of the washing machine.
- Open the hatch on the front of the washing machine, at the bottom right.
- Remove the filter, clean the filter and the filter cavity thoroughly, and place it back.
- Check whether the drain hose is kinked or blocked.
- Don't place the drain hose higher than 1m above the washing machine in the drain pipe.
Wisberg washing machine error E30
Do you see error code E30? This means the door isn't closed properly.
- Open the door and check whether any clothes are stuck between the door and the frame.
- Push the door shut firmly until you hear a clear click.
If this doesn't work, the door lock may be broken. In this case, contact a technician.
Other Wisberg washing machine errors
Do you see one of the error codes below on your Wisberg washing machine display? You need a technician.
- E33: water level sensor error
- E36: heating malfunction
- E37 or E38: temperature sensor malfunction
- E50, E61, E62, or E64: printed circuit board error
- E60: motor not running
- E80: communication error
Problem not solved?
Always make sure you keep the washing machine clean. Clean the filter at the bottom of the washing machine thoroughly. This prevents errors. It can also help to reset the washing machine. Unplug the plug from the socket, wait 30 minutes, and reconnect the washing machine. If this doesn't work, a technician is required. Is it still covered by the warranty? You can fill out an online return form with a repair request. Isn't is covered by the warranty anymore? Our experienced white goods technicians can also repair your dryer at your house for a fee.
Article by Chiara
Washing Machine Expert.
